Flat Pack Kitchens

Step One – Book Your Consultation

Westwood Workshop are your local flat pack kitchen specialists in Brisbane. We can provide flat pack kitchens in a range of designs and styles and offer the choice of having your kitchen delivered as a flatpack or pre-assembled, ready for installation. Consultations take place in our showroom at Lawnton on Brisbane’s Northside. Initial consultation will be one hour in which we will use your measurements and ideas to design and draw your kitchen using our 3D design program. We will allow an additional 20 minutes at any stage to make small adjustments to these drawings.

Consultation Cost: $180.00 (non-refundable – if you choose to proceed with your kitchen, we will credit this amount to your final bill).

If a site measure is required, this will be charged at a higher rate.

Site Measure Cost: $200.00 (non-refundable)

Step Two – Choose Your Option

Option 1

  • Kitchen cabinetry supplied to you flat packed and wrapped in individual cabinets for easy assembly and installation.
  • Includes carcass, colour board, hardware and fixings.
  • Includes drawings and instructions for installation.
  • Pick up or delivered (charges apply)

Option 2

  • Kitchen cabinetry supplied to you pre-assembled and ready for installation.
  • Includes carcass, colour board, hardware and fixings.
  • Includes drawings and instructions for installation.
  • Pick up or delivered (charges apply)

Option 3

  • Kitchen cabinetry assembled and installed (includes delivery).
  • Includes carcass, colour board, hardware and fixings.

Step Three – Choose Your Colour

Our Flat Pack Kitchen Packages include cabinetry only. Cabinets are manufactured in 16mm white carcass and finished in the 16mm colour of your choice.

Our colour board is supplied by Polytec (www.polytec.com.au). To make the decision-making process easier, we have preselected several colours for you to choose from.

Colour Finish
Classic White Sheen or Matt
Polar White Sheen or Matt
Amaro Sheen
Oyster Grey Matt
Canterbury Grey Sheen or Matt
Oxford Matt
Black Matt
Natural Oak Matt
Combat Teak Matt
Shannon Oak Matt

All drawers will be manufactured using Smooth Soft Close drawer runners and all doors will manufactured using DTC Soft Close Hinges.

All other components of your kitchen will need to be sourced separately. Our recommended suppliers are listed below.

Extras

  • For customers that choose Option 1 or 2 – we also offer a call out service to assist with assembly or installation of cabinets. This is charged at a flat rate of $75.00/hour ex GST.
  • Delivery charges:
    • Up to 20km from workshop – $150.00
    • 20 to 60km from workshop – $100.00/20km
    • Over 60km from workshop – this will be determined on a case by case basis
  • As an addition to any of the kitchen package options, we can offer either a pull out, recirculating range hood or a vented range hood installed in cabinetry for $300.00 each.

Sample Kitchen

Aerial View of Cabinetry
Wall Side of Kitchen
Kitchen Island

This kitchen is a standard size kitchen with a small island.

Wall Side Dimensions – 2250mm high x 3700mm wide x 580mm deep

With space allowances for a fridge, oven, and cook top. This kitchen also includes a full height, two-door pantry with adjustable shelves, and overhead cupboards above the cook top and fridge.

Island Dimensions – 880mm high x 1386mm wide x 580mm deep

The island contains a space for your dishwasher and a microwave box manufactured in your choice of colour board with a pot drawer below.

Sample Pricing

To give you have a rough idea of the pricing difference between each of our package options, the above Sample Kitchen is priced as follows:

Option Price (ex GST)
Option 1 – Flat Pack $4,395.00
Option 2 – Assembled $5,595.00
Option 3 – Assembled and Installed $6,795.00

This price is for cabinetry only. Bench tops, handles, appliances, splash backs, and all other accessories will need to be arranged by the customer.

Terms and Conditions

  • Westwood Workshop will use drawings and plans created in the initial consultation from measurements provided by the customer to cut the kitchen panels. Westwood Workshop hold no responsibility if these measurements are incorrect.
  • A deposit of 50% will be required on acceptance of your quote with the balance due before delivery/pick up.
  • As part of our quality control procedures, all panels will be checked for damage before leaving our workshop. It is the responsibility of the customer to ensure they check cabinetry for damage within five (5) days of receiving delivery. Any defects are to be submitted with pictures of both the damage and the panel sticker and emailed to us for verification. Any damage noted after the first five days will not be the responsibility of Westwood Workshop.
  • All prices listed on this website are excluding GST.

Contact Us

To book your consultation – just contact our friendly staff! Phone (07) 3285 6565 or email sales@westwoodworkshop.com.au